|
"style
from within"
|
|||||
|
place an order: 310 451 2133
or email moreinfo@torasport.com |
||||||
| Installation
Instructions
|
||||||
| Installing
Torasport Dash Trim is easy. Just follow these easy steps for a professional
installation: · Check fit and alignment · Clean surfaces thoroughly with alcohol · For large pieces, position and apply top half · Apply lower half. Small pieces can be done at once · Press into position while gently warming with a hair dryer |
||||||
| Step
1: Carefully check the fit of each dash piece to assure proper fit and alignment of each part. DO NOT REMOVE BACKING AT THIS TIME! |
 |
|||||
| Step
2: Use alcohol on a cotton pad to wipe surface clean. THE SURFACE MUST BE PERFECTLY DRY, AND FREE OF ANY OILS OR CONTAMINANTS for the dash kit to adhere properly! |
 |
|||||
| Step
3: For large pieces carefully reposition dash piece in place (see Step 1). Carefully pull back top half and remove backing. Then starting at the middle and working towards the top, carefully press dash into position. Proceed to Step 5. For small pieces you can remove entire red liner, install and proceed to Step 6. |
 |
|||||
| Step
4: Gently lift lower portion and remove the rest of the backing. Starting from the middle and working down, carefully press dash into place. |
 |
|||||
| Step
5: To complete installation. firmly press dash into position while gently warming with hair dryer. DO NOT OVERHEAT DASH. |
 |
|||||
 |
||||||
 |
||||||